![]() ![]() * Other configurations available upon requestĬonfiguration Method - Via PM180 touch screen, or directly via RS485 ModbusĬonfigurable Parameters - Emissivity Setting, Averaging, Peak/Valley Hold Processing, Reflected Energy CompensationĬable Length - 1m (longer lengths available to order) Repeatability- ± 0.5% of reading or ± 0.5✬ whichever is greaterįormat - 90, 8 data bits, no parity, 1 stop bit * Analogue and relay outputs via optional ICP DAS modulesĪccuracy - ☑% of reading or ☑✬ whichever is greater.High capacity data logging to MicroSD Card.Operates as Modbus master and Modbus slave.Configure, display and log data and alarms from up to 6 sensors per terminal unit, simultaneously or individually.Analogue and alarm relay outputs via optional modules.Build larger systems using the PM180’s separate Modbus Master and Slave interfaces.Touch screen terminal for configuration, display, alarms and data logging.Miniature non-contact temperature sensors with RS485 Modbus communications.It is possible to measure the temperature of hundreds or thousands of locations on the same network. To measure more than 6 locations, PyroMiniBus sensors and PM180 sub-networks may be connected to an RS485 Modbus SCADA system or PLC. With up to 6 sensors connected to one PM180, the PyroMiniBus is an ideal low-cost non-contact temperature measurement system. Up to 6 sensors can be connected to the optional PM180 interface module, which provides temperature display, configuration, and high-capacity data logging to a MicroSD Card.Īnalogue and relay outputs are available via separate DIN rail mounted modules. The sensors measure just 45 mm long (plus cable gland), so they can fit into the smallest of spaces. PyroMiniBus sensors have an operating temperature rating of up to 120☌ with no need for cooling. They can measure food, paper, thick plastics, asphalt, paint, bulk materials and organic materials, as well as most dirty, rusty or oily surfaces. They are sealed to IP65, built from 316 stainless steel, and fully tested to industrial EMC standards. PyroMiniBus sensors are designed to measure the surface temperature of non-reflective materials in industrial applications, from -20☌ to 1000☌. ![]() The PyroMiniBus is an industrial infrared temperature monitoring system, with miniature sensing heads and optional display modules. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |